# packages

pkgId: f60f4cce839937df93311316af5326884f6a0a9415b80764639934406ed6ae9a
name: tuna
arch: noarch
version: 0.13
epoch: 0
release: 9.el7
summary: Application tuning GUI & command line utility
url: https://git.kernel.org/pub/scm/utils/tuna/tuna.git
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: tuna-0.13-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tuna-0.13-9.el7.noarch.rpm
checksum_type: sha256
description:
  Provides interface for changing scheduler and IRQ tunables, at whole CPU and at
  per thread/IRQ level. Allows isolating CPUs for use by a specific application
  and moving threads and interrupts to a CPU by just dragging and dropping them.
  Operations can be done on CPU sockets, understanding CPU topology.

  Can be used as a command line utility without requiring the GUI libraries to be
  installed.


pkgId: bd4bacf3bc8cf4852e439e50ace3f1062d600335a743f099d89a7178186da45b
name: tuned
arch: noarch
version: 2.11.0
epoch: 0
release: 5.el7
summary: A dynamic adaptive system tuning daemon
url: http://www.tuned-project.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: tuned-2.11.0-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tuned-2.11.0-5.el7.noarch.rpm
checksum_type: sha256
description:
  The tuned package contains a daemon that tunes system settings dynamically.
  It does so by monitoring the usage of several system components periodically.
  Based on that information components will then be put into lower or higher
  power saving modes to adapt to the current usage. Currently only ethernet
  network and ATA harddisk devices are implemented.


pkgId: f88c07239cab0e55239ad2b741070bafad360f4eac80fcf7c1bf277b7481e73d
name: tuned-profiles-compat
arch: noarch
version: 2.11.0
epoch: 0
release: 5.el7
summary: Additional tuned profiles mainly for backward compatibility with tuned 1.0
url: http://www.tuned-project.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: tuned-2.11.0-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tuned-profiles-compat-2.11.0-5.el7.noarch.rpm
checksum_type: sha256
description:
  Additional tuned profiles mainly for backward compatibility with tuned 1.0.
  It can be also used to fine tune your system for specific scenarios.


pkgId: 7980f19126bccace122f77c3c2cca71e66ceb2139a841bc1380e1f1c4241ac30
name: tuned-utils
arch: noarch
version: 2.11.0
epoch: 0
release: 5.el7
summary: Various tuned utilities
url: http://www.tuned-project.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: tuned-2.11.0-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tuned-utils-2.11.0-5.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains utilities that can help you to fine tune and
  debug your system and manage tuned profiles.


pkgId: 9f40e5e4cd54f0821f2c64c441b62ecd02e469b2295abd200805b97b6434db88
name: tuned-utils-systemtap
arch: noarch
version: 2.11.0
epoch: 0
release: 5.el7
summary: Disk and net statistic monitoring systemtap scripts
url: http://www.tuned-project.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: tuned-2.11.0-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/tuned-utils-systemtap-2.11.0-5.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains several systemtap scripts to allow detailed
  manual monitoring of the system. Instead of the typical IO/sec it collects
  minimal, maximal and average time between operations to be able to
  identify applications that behave power inefficient (many small operations
  instead of fewer large ones).


pkgId: 6d748c81e3b7c86bbc17d998dde8c11d4009cdcebf399da0e080635551c9c39d
name: turbojpeg-devel
arch: ppc64le
version: 1.2.90
epoch: 0
release: 8.el7
summary: Headers for the TurboJPEG library
url: http://sourceforge.net/projects/libjpeg-turbo
rpm_license: IJG
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: libjpeg-turbo-1.2.90-8.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/turbojpeg-devel-1.2.90-8.el7.ppc64le.rpm
checksum_type: sha256
description:
  This package contains header files necessary for developing programs which
  will manipulate JPEG files using the TurboJPEG library.


pkgId: 07864f926c10904c09f0d3cd3581f737762959fb5bcb175a40122ae280be757c
name: ucx
arch: ppc64le
version: 1.4.0
epoch: 0
release: 1.el7
summary: UCX is a communication library implementing high-performance messaging
url: http://www.openucx.org
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: ucx-1.4.0-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ucx-1.4.0-1.el7.ppc64le.rpm
checksum_type: sha256
description:
  UCX stands for Unified Communication X. It requires either RDMA-capable device
  (InfiniBand, RoCE, etc), Cray Gemini or Aries, for inter-node communication.
  Future versions will support also TCP for inter-node, to lift that hardware
  dependency.
  In addition, the library can be used for intra-node communication by leveraging
  the following shared memory mechanisms: posix. sysv, cma, knem, xpmem.


pkgId: b2cef5ea72131d1940efa64314aae6ad44228dad425dc26a35a87adcdfa73160
name: udisks2
arch: ppc64le
version: 2.7.3
epoch: 0
release: 9.el7
summary: Disk Manager
url: https://github.com/storaged-project/udisks
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: udisks2-2.7.3-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/udisks2-2.7.3-9.el7.ppc64le.rpm
checksum_type: sha256
description:
  The Udisks project provides a daemon, tools and libraries to access and
  manipulate disks, storage devices and technologies.


pkgId: 72ef3a929f6f09433e399c8c63d99061a38dd8b4a621e12c921281058ee958ed
name: unixODBC
arch: ppc64le
version: 2.3.1
epoch: 0
release: 14.el7
summary: A complete ODBC driver manager for Linux
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: unixODBC-2.3.1-14.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/unixODBC-2.3.1-14.el7.ppc64le.rpm
checksum_type: sha256
description:
  Install unixODBC if you want to access databases through ODBC.
  You will also need the mysql-connector-odbc package if you want to access
  a MySQL database, and/or the postgresql-odbc package for PostgreSQL.


pkgId: f312e60332340a71fe3312688286a95f2d8d7497c4858a8f7c5aa464d9c04d1f
name: unixODBC-devel
arch: ppc64le
version: 2.3.1
epoch: 0
release: 14.el7
summary: Development files for programs which will use the unixODBC library
url: http://www.unixODBC.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: unixODBC-2.3.1-14.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/unixODBC-devel-2.3.1-14.el7.ppc64le.rpm
checksum_type: sha256
description:
  The unixODBC package can be used to access databases through ODBC
  drivers. If you want to develop programs that will access data through
  ODBC, you need to install this package.


pkgId: 3326f8a4d1d8b378a7c277f5353db7e7187eca03b86bf05e5e0459265adab5a3
name: unzip
arch: ppc64le
version: 6.0
epoch: 0
release: 20.el7
summary: A utility for unpacking zip files
url: http://www.info-zip.org/UnZip.html
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: unzip-6.0-20.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/unzip-6.0-20.el7.ppc64le.rpm
checksum_type: sha256
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: fd714e3fffb8f0956eaf1aabab606ac00da8a3561e5d1dfc4ed01d556474a1e0
name: uriparser
arch: ppc64le
version: 0.7.5
epoch: 0
release: 10.el7
summary: URI parsing library - RFC 3986
url: http://uriparser.sourceforge.net/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: System Environment/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: uriparser-0.7.5-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/uriparser-0.7.5-10.el7.ppc64le.rpm
checksum_type: sha256
description:
  Uriparser is a strictly RFC 3986 compliant URI parsing library written
  in C. uriparser is cross-platform, fast, supports Unicode and is
  licensed under the New BSD license.


pkgId: 1b36f12d8eaa006d08f52e8f258158e0558d2b65636b86889ac0b68642378cdd
name: uriparser-devel
arch: ppc64le
version: 0.7.5
epoch: 0
release: 10.el7
summary: Development files for uriparser
url: http://uriparser.sourceforge.net/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: uriparser-0.7.5-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/uriparser-devel-0.7.5-10.el7.ppc64le.rpm
checksum_type: sha256
description:
  The uriparser-devel package contains libraries and header files for
  developing applications that use uriparser.


pkgId: b45f7502ba939dfe46208f67497691b3db2d19a180b50da8f14c22f58894408d
name: urw-base35-bookman-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: URW Bookman font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-bookman-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains URW Bookman font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 4fbd38601d8275feffce5f717c372945271ab9cbd26e99953a639d760f2e7d38
name: urw-base35-c059-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: C059 font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-c059-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains C059 font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 76dddbaf5c5fbe5c572de0ad1457d81b9c84425cbfef0aa3d6ee2d1df5282d17
name: urw-base35-d050000l-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: D050000L font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-d050000l-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains D050000L font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 93f70156e1e6cf82ce7d60ad1478064ee5131ff7bebb5e8664a0c92e8ba22986
name: urw-base35-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Core Font Set containing 35 freely distributable fonts from (URW)++
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.

  This meta-package will install all the 35 fonts from the urw-base35-fonts.


pkgId: 728ef50be92a72a0f19513d82ccde357ac7e381f94be658922676fbf9f768a8b
name: urw-base35-fonts-common
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Common files of the (URW)++ Level 2 Core Font Set
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-fonts-common-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.

  This package contains the necessary license files for this font set.


pkgId: 5a7b7a94dbca5bfb3b9079cf2ec6fc1c119d628ea007bfb507d7c95044d7f573
name: urw-base35-fonts-devel
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: RPM macros related to (URW)++ Level 2 Core Font Set
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-fonts-devel-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.

  This package is useful for Fedora development purposes only. It installs RPM
  macros useful for building packages against urw-base35-fonts,
  as well as all the fonts contained in this font set.


pkgId: d6c0f7cb6a5e571f4cb0cba12b4a240ca5039fb5bb04567c1b74f5f10805a841
name: urw-base35-fonts-legacy
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Legacy version of (URW)++ Level 2 Core Font Set
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-fonts-legacy-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.

  This package provides previous (legacy) versions of these fonts, which are still
  required by some of the software in Fedora, like e.g. xfig, X11, etc.


pkgId: ff942246e56f7148f2359d74329cd056efa0af56129b2fad1a6b75042faf7242
name: urw-base35-gothic-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: URW Gothic font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-gothic-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains URW Gothic font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: b194d70657a8adca5dcd006f5fe47fcede8302fca5c56500cc45f03ca05e186d
name: urw-base35-nimbus-mono-ps-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Nimbus Mono PS font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-nimbus-mono-ps-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains Nimbus Mono PS font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: cb0ce94c270ad5491bb151905803908b9c992aa625e05c544b94dccf8cb5c9e2
name: urw-base35-nimbus-roman-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Nimbus Roman font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-nimbus-roman-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains Nimbus Roman font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: f006b79170dc4aea51ef2ef1e6edbf7b84f6294f248e8ee1c36897297a9a5c1d
name: urw-base35-nimbus-sans-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Nimbus Sans font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-nimbus-sans-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains Nimbus Sans font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 68c3cabd8576aee1d047f19ca8951558eb23a4cdd017528e867aa19e44ec081d
name: urw-base35-p052-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: P052 font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-p052-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains P052 font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 2d4ba55c9d0ed26309a8cbada656671c74e687d9b194dc981af2b4e5308281f5
name: urw-base35-standard-symbols-ps-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Standard Symbols PS font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-standard-symbols-ps-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains Standard Symbols PS font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 4d8f01ab6f6bc104691f53a5e73617452e6099d2a2c1a2c0427e6e7c160c9b60
name: urw-base35-z003-fonts
arch: noarch
version: 20170801
epoch: 0
release: 10.el7
summary: Z003 font family [part of Level 2 Core Font Set]
url: https://www.urwpp.de/en/
rpm_license: AGPLv3
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: urw-base35-fonts-20170801-10.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/urw-base35-z003-fonts-20170801-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains Z003 font family,
  which is part of Level 2 Core Font Set.


  The Level 2 Core Font Set is a PostScript specification of 35 base fonts that
  can be used with any PostScript file. In Fedora, these fonts are provided freely
  by (URW)++ company, and are mainly utilized by applications using Ghostscript.


pkgId: 596ffd85c6e86d2385e0ccfdbe734bd978176fbb6d200bb66ba768d82ea69463
name: usermode
arch: ppc64le
version: 1.111
epoch: 0
release: 6.el7
summary: Tools for certain user account management tasks
url: https://pagure.io/usermode/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: usermode-1.111-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/usermode-1.111-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  The usermode package contains the userhelper program, which can be
  used to allow configured programs to be run with superuser privileges
  by ordinary users.


pkgId: 42e61bf3d0d8f26a77456ead2c8ed906ceff26bc65dd7b7c104c0e218402d61e
name: usermode-gtk
arch: ppc64le
version: 1.111
epoch: 0
release: 6.el7
summary: Graphical tools for certain user account management tasks
url: https://pagure.io/usermode/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: usermode-1.111-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/usermode-gtk-1.111-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  The usermode-gtk package contains several graphical tools for users:
  userinfo, usermount and userpasswd.  Userinfo allows users to change
  their finger information.  Usermount lets users mount, unmount, and
  format file systems.  Userpasswd allows users to change their
  passwords.

  Install the usermode-gtk package if you would like to provide users with
  graphical tools for certain account management tasks.


pkgId: 538565c26420ab6d7c03e23aaa3e4d9719fd8e9b967f0a8bcd6ff0e0dfe33df2
name: util-linux
arch: ppc64le
version: 2.23.2
epoch: 0
release: 61.el7
summary: A collection of basic system utilities
url: http://en.wikipedia.org/wiki/Util-linux
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and BSD with advertising and Public Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: util-linux-2.23.2-61.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/util-linux-2.23.2-61.el7.ppc64le.rpm
checksum_type: sha256
description:
  The util-linux package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, Util-linux contains the fdisk configuration tool and the login
  program.


pkgId: 5bad1555868aec7fa3000faa881cca5af9883eea1c1c30c15e93eb8c530f5e0b
name: uuidd
arch: ppc64le
version: 2.23.2
epoch: 0
release: 61.el7
summary: Helper daemon to guarantee uniqueness of time-based UUIDs
url: http://en.wikipedia.org/wiki/Util-linux
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: util-linux-2.23.2-61.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/uuidd-2.23.2-61.el7.ppc64le.rpm
checksum_type: sha256
description:
  The uuidd package contains a userspace daemon (uuidd) which guarantees
  uniqueness of time-based UUID generation even at very high rates on
  SMP systems.


pkgId: 0f6249298b0ffcbd0f7d0ccd258b11abd0bfa834d6cc50a7a39f9e73e2c46b33
name: valgrind
arch: ppc64le
version: 3.14.0
epoch: 1
release: 16.el7
summary: Tool for finding memory management bugs in programs
url: http://www.valgrind.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Development/Debuggers
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: valgrind-3.14.0-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/valgrind-3.14.0-16.el7.ppc64le.rpm
checksum_type: sha256
description:
  Valgrind is an instrumentation framework for building dynamic analysis
  tools. There are Valgrind tools that can automatically detect many
  memory management and threading bugs, and profile your programs in
  detail. You can also use Valgrind to build new tools. The Valgrind
  distribution currently includes six production-quality tools: a memory
  error detector (memcheck, the default tool), two thread error
  detectors (helgrind and drd), a cache and branch-prediction profiler
  (cachegrind), a call-graph generating cache and branch-prediction
  profiler (callgrind), and a heap profiler (massif).


pkgId: e8e07ec11959cc95da0fe80022d450547fe0baf13d9c32070f6b858f0ef9c15c
name: valgrind-openmpi
arch: ppc64le
version: 3.14.0
epoch: 1
release: 16.el7
summary: OpenMPI support for valgrind
url: http://www.valgrind.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Development/Debuggers
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: valgrind-3.14.0-16.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/valgrind-openmpi-3.14.0-16.el7.ppc64le.rpm
checksum_type: sha256
description:
  A wrapper library for debugging OpenMPI parallel programs with valgrind.
  See the section on Debugging MPI Parallel Programs with Valgrind in the
  Valgrind User Manual for details.


pkgId: bda0c306194b32f1ced0c72e2c88a5b53a1813f236e4d8ea4da24bd520c2a1c9
name: veritysetup
arch: ppc64le
version: 2.0.3
epoch: 0
release: 5.el7
summary: A utility for setting up dm-verity volumes
url: https://gitlab.com/cryptsetup/cryptsetup
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: cryptsetup-2.0.3-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/veritysetup-2.0.3-5.el7.ppc64le.rpm
checksum_type: sha256
description:
  The veritysetup package contains a utility for setting up
  disk verification using dm-verity kernel module.


pkgId: 92b4fd289af79b152bbf3939446f021137788e30bd6307fecb8aa6741db5902f
name: vim-X11
arch: ppc64le
version: 7.4.629
epoch: 2
release: 6.el7
summary: The VIM version of the vi editor for the X Window System
url: http://www.vim.org/
rpm_license: Vim
rpm_vendor: CentOS
rpm_group: Applications/Editors
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: vim-7.4.629-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vim-X11-7.4.629-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and
  more. VIM-X11 is a version of the VIM editor which will run within the
  X Window System.  If you install this package, you can run VIM as an X
  application with a full GUI interface and mouse support.

  Install the vim-X11 package if you'd like to try out a version of vi
  with graphics and mouse capabilities.  You'll also need to install the
  vim-common package.


pkgId: f4049068b5914eb88d3a1aa800fd059d51a349ea068c7c8094b64f76ea34955b
name: vim-common
arch: ppc64le
version: 7.4.629
epoch: 2
release: 6.el7
summary: The common files needed by any version of the VIM editor
url: http://www.vim.org/
rpm_license: Vim
rpm_vendor: CentOS
rpm_group: Applications/Editors
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: vim-7.4.629-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vim-common-7.4.629-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.  The
  vim-common package contains files which every VIM binary will need in
  order to run.

  If you are installing vim-enhanced or vim-X11, you'll also need
  to install the vim-common package.


pkgId: 967b74add3a27f924bd17da20c92f2a98445d95d3d0fc4d252e33c230cf759cd
name: vim-enhanced
arch: ppc64le
version: 7.4.629
epoch: 2
release: 6.el7
summary: A version of the VIM editor which includes recent enhancements
url: http://www.vim.org/
rpm_license: Vim
rpm_vendor: CentOS
rpm_group: Applications/Editors
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: vim-7.4.629-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vim-enhanced-7.4.629-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more.  The
  vim-enhanced package contains a version of VIM with extra, recently
  introduced features like Python and Perl interpreters.

  Install the vim-enhanced package if you'd like to use a version of the
  VIM editor which includes recently added enhancements like
  interpreters for the Python and Perl scripting languages.  You'll also
  need to install the vim-common package.


pkgId: fb63c598abaf9a5756eb5ade272620fecf27874dac58aa4578033bbb193d73a8
name: vim-filesystem
arch: ppc64le
version: 7.4.629
epoch: 2
release: 6.el7
summary: VIM filesystem layout
url: http://www.vim.org/
rpm_license: Vim
rpm_vendor: CentOS
rpm_group: Applications/Editors
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: vim-7.4.629-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vim-filesystem-7.4.629-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  This package provides some directories which are required by other
  packages that add vim files, p.e.  additional syntax files or filetypes.


pkgId: 78c6f9d86af3fb14aa4ed5432ef39864ace04d5a76b310c6d4516cb9baa026fb
name: vim-minimal
arch: ppc64le
version: 7.4.629
epoch: 2
release: 6.el7
summary: A minimal version of the VIM editor
url: http://www.vim.org/
rpm_license: Vim
rpm_vendor: CentOS
rpm_group: Applications/Editors
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: vim-7.4.629-6.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vim-minimal-7.4.629-6.el7.ppc64le.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more. The
  vim-minimal package includes a minimal version of VIM, which is
  installed into /bin/vi for use when only the root partition is
  present. NOTE: The online help is only available when the vim-common
  package is installed.


pkgId: 59bc2e4ceab3322ca5bc4ff76323551c77bab82ee0917c3abca985b4b8dce46b
name: vinagre
arch: ppc64le
version: 3.22.0
epoch: 0
release: 12.el7
summary: VNC client for GNOME
url: https://wiki.gnome.org/Apps/Vinagre
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: vinagre-3.22.0-12.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vinagre-3.22.0-12.el7.ppc64le.rpm
checksum_type: sha256
description:
  Vinagre is a VNC client for the GNOME desktop.

  With Vinagre you can have several connections open simultaneously, bookmark
  your servers thanks to the Favorites support, store the passwords in the
  GNOME keyring, and browse the network to look for VNC servers.

  Apart from the VNC protocol, vinagre supports Spice and RDP.


pkgId: 39ae7f83a0ff42874c0604be281f2b665eb6c1d915545f8a246cb165509cc0d8
name: virt-dib
arch: ppc64le
version: 1.40.2
epoch: 1
release: 5.el7
summary: Safe and secure diskimage-builder replacement
url: http://libguestfs.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: libguestfs-1.40.2-5.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/virt-dib-1.40.2-5.el7.ppc64le.rpm
checksum_type: sha256
description:
  Virt-dib is a safe and secure alternative to the OpenStack
  diskimage-builder command.  It is compatible with most
  diskimage-builder elements.


pkgId: 76ada74fcbe5a0632446f6b670234aaaac617303535fa79b40e78fabdf3152d1
name: virt-install
arch: noarch
version: 1.5.0
epoch: 0
release: 7.el7
summary: Utilities for installing virtual machines
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/Emulators
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: virt-manager-1.5.0-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/virt-install-1.5.0-7.el7.noarch.rpm
checksum_type: sha256
description:
  Package includes several command line utilities, including virt-install
  (build and install new VMs) and virt-clone (clone an existing virtual
  machine).


pkgId: aaf3c41f8fec74f12e2e7cad92702478e84c0879ce36329030f5a1497959ce34
name: virt-manager
arch: noarch
version: 1.5.0
epoch: 0
release: 7.el7
summary: Desktop tool for managing virtual machines via libvirt
url: http://virt-manager.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/Emulators
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: virt-manager-1.5.0-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/virt-manager-1.5.0-7.el7.noarch.rpm
checksum_type: sha256
description:
  Virtual Machine Manager provides a graphical tool for administering virtual
  machines for KVM, Xen, and LXC. Start, stop, add or remove virtual devices,
  connect to a graphical or serial console, and see resource usage statistics
  for existing VMs on local or remote machines. Uses libvirt as the backend
  management API.


pkgId: 5d02506f498f20a277e5995f7ade113dff2e36ad4b39a6df9b031cd6612cfcdf
name: virt-who
arch: noarch
version: 0.24.7
epoch: 0
release: 1.el7
summary: Agent for reporting virtual guest IDs to subscription-manager
url: https://github.com/candlepin/virt-who
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-02.bsys.centos.org
rpm_sourcerpm: virt-who-0.24.7-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/virt-who-0.24.7-1.el7.noarch.rpm
checksum_type: sha256
description:
  Agent that collects information about virtual guests present in the system and
  report them to the subscription manager.


pkgId: ec880986512c028ce73356b0355d6b0edad5cc6f97568de977a2e249dff43abb
name: virtuoso-opensource
arch: ppc64le
version: 6.1.6
epoch: 1
release: 7.el7
summary: A high-performance object-relational SQL database
url: http://vos.openlinksw.com/owiki/wiki/VOS/
rpm_license: GPLv2 with exceptions
rpm_vendor: CentOS
rpm_group: Applications/Databases
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: virtuoso-opensource-6.1.6-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/virtuoso-opensource-6.1.6-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  Virtuoso is a scalable cross-platform server that combines SQL/RDF/XML
  Data Management with Web Application Server and Web Services Platform
  functionality.


pkgId: 9da2bc3345ded1c5d485514ac50ab45c65ee4043be48a6f22c95c0869011075a
name: volume_key
arch: ppc64le
version: 0.3.9
epoch: 0
release: 9.el7
summary: An utility for manipulating storage encryption keys and passphrases
url: https://pagure.io/volume_key/
rpm_license: GPLv2 and (MPLv1.1 or GPLv2 or LGPLv2)
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: volume_key-0.3.9-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/volume_key-0.3.9-9.el7.ppc64le.rpm
checksum_type: sha256
description:
  This package provides a command-line tool for manipulating storage volume
  encryption keys and storing them separately from volumes.

  The main goal of the software is to allow restoring access to an encrypted
  hard drive if the primary user forgets the passphrase.  The encryption key
  back up can also be useful for extracting data after a hardware or software
  failure that corrupts the header of the encrypted volume, or to access the
  company data after an employee leaves abruptly.


pkgId: ee6c31f68e6778a438d3f5d403d943673bf051f88d3ae73880e1bfb197615b3b
name: volume_key-devel
arch: ppc64le
version: 0.3.9
epoch: 0
release: 9.el7
summary: A library for manipulating storage encryption keys and passphrases
url: https://pagure.io/volume_key/
rpm_license: GPLv2 and (MPLv1.1 or GPLv2 or LGPLv2)
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: volume_key-0.3.9-9.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/volume_key-devel-0.3.9-9.el7.ppc64le.rpm
checksum_type: sha256
description:
  This package provides libvolume_key, a library for manipulating storage volume
  encryption keys and storing them separately from volumes.

  The main goal of the software is to allow restoring access to an encrypted
  hard drive if the primary user forgets the passphrase.  The encryption key
  back up can also be useful for extracting data after a hardware or software
  failure that corrupts the header of the encrypted volume, or to access the
  company data after an employee leaves abruptly.


pkgId: b8ba2fb2a471262c640a91f03b9056da93b239ee8026faefae871bbeb3e50d0b
name: vulkan
arch: ppc64le
version: 1.1.97.0
epoch: 0
release: 1.el7
summary: Vulkan loader and validation layers
url: https://github.com/KhronosGroup
rpm_license: ASL 2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: vulkan-1.1.97.0-1.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/vulkan-1.1.97.0-1.el7.ppc64le.rpm
checksum_type: sha256
description:
  Vulkan is a new generation graphics and compute API that provides
  high-efficiency, cross-platform access to modern GPUs used in a wide variety of
  devices from PCs and consoles to mobile phones and embedded platforms.

  This package contains the reference ICD loader and validation layers for
  Vulkan.


pkgId: 239660ff48d281e53ab8ab3860534a17840b9b70f191d273b21851d2b307a964
name: webkitgtk4
arch: ppc64le
version: 2.22.7
epoch: 0
release: 2.el7
summary: GTK+ Web content engine library
url: http://www.webkitgtk.org
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: webkitgtk4-2.22.7-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/webkitgtk4-2.22.7-2.el7.ppc64le.rpm
checksum_type: sha256
description:
  WebKitGTK+ is the port of the portable web rendering engine WebKit to the
  GTK+ platform.

  This package contains WebKitGTK+ for GTK+ 3.


pkgId: 1e9996fdd90769cf1db1b4d8eae3ab2086ce11054bc0537d64a6d3051256a50a
name: webkitgtk4-devel
arch: ppc64le
version: 2.22.7
epoch: 0
release: 2.el7
summary: Development files for webkitgtk4
url: http://www.webkitgtk.org
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: webkitgtk4-2.22.7-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/webkitgtk4-devel-2.22.7-2.el7.ppc64le.rpm
checksum_type: sha256
description:
  The webkitgtk4-devel package contains libraries, build data, and header
  files for developing applications that use webkitgtk4.


pkgId: 6d013630d681bd9c31b1702037917bd2ba67996c77958ae3af9c954446b272bf
name: webkitgtk4-jsc-devel
arch: ppc64le
version: 2.22.7
epoch: 0
release: 2.el7
summary: Development files for JavaScript engine from webkitgtk4
url: http://www.webkitgtk.org
rpm_license: LGPLv2
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: webkitgtk4-2.22.7-2.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/webkitgtk4-jsc-devel-2.22.7-2.el7.ppc64le.rpm
checksum_type: sha256
description:
  The webkitgtk4-jsc-devel package contains libraries, build data, and header
  files for developing applications that use JavaScript engine from webkitgtk4.


pkgId: 4e47d279ee40317742ef063a664cc18f13e30660c70cd68195bfbe53971aa69e
name: xchat
arch: ppc64le
version: 2.8.8
epoch: 1
release: 24.el7
summary: A popular and easy to use graphical IRC (chat) client
url: http://www.xchat.org
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Applications/Internet
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xchat-2.8.8-24.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xchat-2.8.8-24.el7.ppc64le.rpm
checksum_type: sha256
description:
  X-Chat is an easy to use graphical IRC chat client for the X Window System.
  It allows you to join multiple IRC channels (chat rooms) at the same time,
  talk publicly, private one-on-one conversations etc. Even file transfers
  are possible.

  This includes the plugins to run the Perl and Python scripts.


pkgId: 992735c989a78dba46ba31b2cb16524865ea500cc825456cdede5581f2a35bf3
name: xfsprogs
arch: ppc64le
version: 4.5.0
epoch: 0
release: 20.el7
summary: Utilities for managing the XFS filesystem
url: https://xfs.wiki.kernel.org
rpm_license: GPL+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: xfsprogs-4.5.0-20.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xfsprogs-4.5.0-20.el7.ppc64le.rpm
checksum_type: sha256
description:
  A set of commands to use the XFS filesystem, including mkfs.xfs.

  XFS is a high performance journaling filesystem which originated
  on the SGI IRIX platform.  It is completely multi-threaded, can
  support large files and large filesystems, extended attributes,
  variable block sizes, is extent based, and makes extensive use of
  Btrees (directories, extents, free space) to aid both performance
  and scalability.


pkgId: 6c521358a28a97ea4a058cfd132cc8cad4db1861cad36e2fa6eb3692fe2a8b5e
name: xfsprogs-devel
arch: ppc64le
version: 4.5.0
epoch: 0
release: 20.el7
summary: XFS filesystem-specific headers
url: https://xfs.wiki.kernel.org
rpm_license: GPL+ and LGPLv2+
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: xfsprogs-4.5.0-20.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xfsprogs-devel-4.5.0-20.el7.ppc64le.rpm
checksum_type: sha256
description:
  xfsprogs-devel contains the header files needed to develop XFS
  filesystem-specific programs.

  You should install xfsprogs-devel if you want to develop XFS
  filesystem-specific programs,  If you install xfsprogs-devel, you'll
  also want to install xfsprogs.


pkgId: 388be46c7ecba0305a8d7c827e4f100091fb70d852bda2e46e8251f4f8b2427f
name: xorg-x11-server-Xdmx
arch: ppc64le
version: 1.20.4
epoch: 0
release: 7.el7
summary: Distributed Multihead X Server and utilities
url: http://www.x.org
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorg-x11-server-1.20.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorg-x11-server-Xdmx-1.20.4-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  Xdmx is proxy X server that provides multi-head support for multiple displays
  attached to different machines (each of which is running a typical X server).
  When Xinerama is used with Xdmx, the multiple displays on multiple machines
  are presented to the user as a single unified screen.  A simple application
  for Xdmx would be to provide multi-head support using two desktop machines,
  each of which has a single display device attached to it.  A complex
  application for Xdmx would be to unify a 4 by 4 grid of 1280x1024 displays
  (each attached to one of 16 computers) into a unified 5120x4096 display.


pkgId: bfc6555f561bac7b09532326a6692afb4375ed51d7c88d5e86bfdd7b98e0b29e
name: xorg-x11-server-Xephyr
arch: ppc64le
version: 1.20.4
epoch: 0
release: 7.el7
summary: A nested server.
url: http://www.x.org
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorg-x11-server-1.20.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorg-x11-server-Xephyr-1.20.4-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  Xephyr is an X server which has been implemented as an ordinary
  X application.  It runs in a window just like other X applications,
  but it is an X server itself in which you can run other software.  It
  is a very useful tool for developers who wish to test their
  applications without running them on their real X server.  Unlike
  Xnest, Xephyr renders to an X image rather than relaying the
  X protocol, and therefore supports the newer X extensions like
  Render and Composite.


pkgId: 23ac5f682fc8757969f54b65b3a16cc8c0ce92f7008cd89b7dda46d734e9c65b
name: xorg-x11-server-Xnest
arch: ppc64le
version: 1.20.4
epoch: 0
release: 7.el7
summary: A nested server.
url: http://www.x.org
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorg-x11-server-1.20.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorg-x11-server-Xnest-1.20.4-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  Xnest is an X server which has been implemented as an ordinary
  X application.  It runs in a window just like other X applications,
  but it is an X server itself in which you can run other software.  It
  is a very useful tool for developers who wish to test their
  applications without running them on their real X server.


pkgId: 4c42b34ff25d586631b287dedb66eedc23c1194b51b80d5790a55a69a6e66f87
name: xorg-x11-server-Xorg
arch: ppc64le
version: 1.20.4
epoch: 0
release: 7.el7
summary: Xorg X server
url: http://www.x.org
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorg-x11-server-1.20.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorg-x11-server-Xorg-1.20.4-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  X.org X11 is an open source implementation of the X Window System.  It
  provides the basic low level functionality which full fledged
  graphical user interfaces (GUIs) such as GNOME and KDE are designed
  upon.


pkgId: 7cbe8a5904299ab896cab3b64cdb32c15061585f713ecb1c6c62ec0adb7b79b1
name: xorg-x11-server-Xvfb
arch: ppc64le
version: 1.20.4
epoch: 0
release: 7.el7
summary: A X Windows System virtual framebuffer X server.
url: http://www.x.org
rpm_license: MIT and GPLv2
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorg-x11-server-1.20.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorg-x11-server-Xvfb-1.20.4-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  Xvfb (X Virtual Frame Buffer) is an X server that is able to run on
  machines with no display hardware and no physical input devices.
  Xvfb simulates a dumb framebuffer using virtual memory.  Xvfb does
  not open any devices, but behaves otherwise as an X display.  Xvfb
  is normally used for testing servers.


pkgId: dcaaf85eccaea82552ed3dc67b74b4e3163f7bb13fdbb8076ad287d718d82aec
name: xorg-x11-server-devel
arch: ppc64le
version: 1.20.4
epoch: 0
release: 7.el7
summary: SDK for X server driver module development
url: http://www.x.org
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: User Interface/X
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorg-x11-server-1.20.4-7.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorg-x11-server-devel-1.20.4-7.el7.ppc64le.rpm
checksum_type: sha256
description:
  The SDK package provides the developmental files which are necessary for
  developing X server driver modules, and for compiling driver modules
  outside of the standard X11 source code tree.  Developers writing video
  drivers, input drivers, or other X modules should install this package.


pkgId: 38a6a1ecfad75fb4fc134f6b5cfe21cb752a9a00a3649a6b404b99e7561a9364
name: xorriso
arch: ppc64le
version: 1.4.8
epoch: 0
release: 3.el7
summary: ISO-9660 and Rock Ridge image manipulation tool
url: http://scdbackup.sourceforge.net/xorriso_eng.html
rpm_license: GPLv3+
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: xorriso-1.4.8-3.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/xorriso-1.4.8-3.el7.ppc64le.rpm
checksum_type: sha256
description:
  Xorriso is a program which copies file objects from POSIX compliant
  filesystems into Rock Ridge enhanced ISO-9660 filesystems and allows
  session-wise manipulation of such filesystems. It can load management
  information of existing ISO images and it writes the session results
  to optical media or to filesystem objects. Vice versa xorriso is able
  to copy file objects out of ISO-9660 filesystems.

  Filesystem manipulation capabilities surpass those of mkisofs. Xorriso
  is especially suitable for backups, because of its high fidelity of
  file attribute recording and its incremental update sessions. Optical
  supported media: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+R DL, DVD+RW,
  DVD-RAM, BD-R and BD-RE.


pkgId: 932f3b8d61e70bd0fde8a171f6bd4e017d66da045ed93a5f1c860a4618884444
name: ypserv
arch: ppc64le
version: 2.31
epoch: 0
release: 12.el7
summary: The NIS (Network Information Service) server
url: http://www.linux-nis.org/nis/ypserv/index.html
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: System Environment/Daemons
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: ypserv-2.31-12.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/ypserv-2.31-12.el7.ppc64le.rpm
checksum_type: sha256
description:
  The Network Information Service (NIS) is a system that provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network. NIS can allow users
  to log in on any machine on the network, as long as the machine has
  the NIS client programs running and the user's password is recorded in
  the NIS passwd database. NIS was formerly known as Sun Yellow Pages
  (YP).

  This package provides the NIS server, which will need to be running on
  your network. NIS clients do not need to be running the server.

  Install ypserv if you need an NIS server for your network. You also
  need to install the yp-tools and ypbind packages on any NIS client
  machines.


pkgId: fe511a990a95306f97a3a6291908bbdd4a36d3d4222bfdf78dd8464628c2f77a
name: yum
arch: noarch
version: 3.4.3
epoch: 0
release: 163.el7.centos
summary: RPM package installer/updater/manager
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-3.4.3-163.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-3.4.3-163.el7.centos.noarch.rpm
checksum_type: sha256
description:
  Yum is a utility that can check for and automatically download and
  install updated RPM packages. Dependencies are obtained and downloaded
  automatically, prompting the user for permission as necessary.


pkgId: 2a72c468820b284cfd341bb3edc81de5b33b2ee60c027aa70404a6195a8e6b68
name: yum-NetworkManager-dispatcher
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: NetworkManager script which tells yum to check its cache on network change
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-NetworkManager-dispatcher-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This NetworkManager "dispatch script" forces yum to check its cache if/when a
  new network connection happens in NetworkManager. Note that currently there is
  no checking of previous data, so if your WiFi keeps going up and down (or you
  suspend/resume a lot) yum will recheck its cached data a lot.


pkgId: 15e00dd9b7c8bd00757463b3394feef81155b7ffd08ca8bf631cd29df6597c38
name: yum-cron
arch: noarch
version: 3.4.3
epoch: 0
release: 163.el7.centos
summary: Files needed to run yum updates as a cron job
url: http://yum.baseurl.org/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-3.4.3-163.el7.centos.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-cron-3.4.3-163.el7.centos.noarch.rpm
checksum_type: sha256
description:
  These are the files needed to run yum updates as a cron job.
  Install this package if you want auto yum updates nightly via cron.


pkgId: 0bc49a2bcde222c1345f755de263a484bcebb0a5da66fc29e62967c48ac24b3b
name: yum-plugin-auto-update-debug-info
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to enable automatic updates to installed debuginfo packages
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-auto-update-debug-info-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin looks to see if any debuginfo packages are installed, and if there
  are it enables all debuginfo repositories that are "children" of enabled
  repositories.


pkgId: c4172191df39fbbcb377dac7cb6369033523f3416b7a9a215f67ceea249b559e
name: yum-plugin-changelog
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin for viewing package changelogs before/after updating
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-changelog-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin adds a command line option to allow viewing package changelog
  deltas before or after updating packages.


pkgId: 3b14baa0e84b64685e9335a8a5c2df3766dbf015c7422e80329efb16a167eb67
name: yum-plugin-filter-data
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to list filter based on package data
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-filter-data-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin adds the options --filter- vendors, groups, packagers, licenses,
  arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and
  installed-sizes. Note that each package must match at least one pattern/range in
  each category, if any were specified.


pkgId: 9389f22afadd7579319ce5113342cefb2ff82d909381cfdef26b26e3d4ab4c48
name: yum-plugin-fs-snapshot
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to automatically snapshot your filesystems during updates
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-fs-snapshot-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  When this plugin is installed it will automatically snapshot any
  filesystem that is touched by the packages in a yum update or yum remove.


pkgId: 8cfe3ecc6f438a8b5e352faeab2ba11f902deebd3e9236604789091c19d9dea4
name: yum-plugin-keys
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to deal with signing keys
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-keys-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin adds the commands keys, keys-info, keys-data and keys-remove. They
  allow you to query and remove signing keys.


pkgId: bb25f6e9c73bb85f5aae0dfc07ab19f8e107d586d00bb8e23e9144f34856988d
name: yum-plugin-list-data
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to list aggregate package data
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-list-data-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin adds the commands list- vendors, groups, packagers, licenses,
  arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and
  installed-sizes.


pkgId: e74903ba1b27d1dec866a97ac32533a554589f2a71210008fab1c91010fac59d
name: yum-plugin-local
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to automatically manage a local repo. of downloaded packages
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-local-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  When this plugin is installed it will automatically copy all downloaded packages
  to a repository on the local filesystem, and (re)build that repository. This
  means that anything you've downloaded will always exist, even if the original
  repo. removes it (and can thus. be reinstalled/downgraded/etc.).


pkgId: a9ac2f9cee6e1dd7078813211926d94d9f7a4be13aa2e486850dfca7776a98ed
name: yum-plugin-merge-conf
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to merge configuration changes when installing packages
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-merge-conf-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This yum plugin adds the "--merge-conf" command line option. With this option,
  Yum will ask you what to do with config files which have changed on updating a
  package.


pkgId: e96208d6dbc571a8a63eff302bf4ef79d9e94f3ff4fb004b24fbf86d23ae25b5
name: yum-plugin-post-transaction-actions
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to run arbitrary commands when certain pkgs are acted on
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-post-transaction-actions-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin allows the user to run arbitrary actions immediately following a
  transaction when specified packages are changed.


pkgId: 0871b17f274ad35ebd127b6f85199ae15cc1af5c0918debebd816970ddc6538d
name: yum-plugin-pre-transaction-actions
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to run arbitrary commands when certain pkgs are acted on
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-pre-transaction-actions-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin allows the user to run arbitrary actions prior to a transaction
  when specified packages are changed.


pkgId: 0b540a8c44d15629874e39331b4837e03838d76a117e5fb078f853cbb92deac4
name: yum-plugin-priorities
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: plugin to give priorities to packages from different repos
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-priorities-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin allows repositories to have different priorities.
  Packages in a repository with a lower priority can't be overridden by packages
  from a repository with a higher priority even if repo has a later version.


pkgId: 4d695ef269115e59ba7be1587f24081d9920ce4b996bf190619ba2221f5c9507
name: yum-plugin-protectbase
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to protect packages from certain repositories.
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-protectbase-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin allows certain repositories to be protected. Packages in the
  protected repositories can't be overridden by packages in non-protected
  repositories even if the non-protected repo has a later version.


pkgId: 81c0ba5edb7736e9a2c70831c1735152bcac8e215e57bd7029cf95f12ed8c2c8
name: yum-plugin-ps
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to look at processes, with respect to packages
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-ps-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  When this plugin is installed it adds the yum command "ps", which allows you
  to see which running processes are accociated with which packages (and if they
  need rebooting, or have updates, etc.)


pkgId: c51fc8ccb95350bef271583d3b87ba33b5125cd2ecd65405f7aa6949989b973c
name: yum-plugin-remove-with-leaves
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to remove dependencies which are no longer used because of a removal
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-remove-with-leaves-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin removes any unused dependencies that were brought in by an install
  but would not normally be removed. It helps to keep a system clean of unused
  libraries and packages.


pkgId: 97ec132ca15ada15f045ea4006c5bcaf7df6f6ef737098c933216019c39e0e39
name: yum-plugin-rpm-warm-cache
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to access the rpmdb files early to warm up access to the db
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-rpm-warm-cache-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin reads the rpmdb files into the system cache before accessing the
  rpmdb directly. In some cases this should speed up access to rpmdb information


pkgId: 04b094fd9b6d40424aca64482ba0cd7a6af2f76f4abab92dcc3e943b85ce8f05
name: yum-plugin-show-leaves
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin which shows newly installed leaf packages
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-show-leaves-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  Yum plugin which shows newly installed leaf packages
  and packages that became leaves after a transaction


pkgId: d3317ffb23fd6c530a6b574c37dd21e98d0f8c9677043cba125efdbe482e837b
name: yum-plugin-tmprepo
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to add temporary repositories
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-tmprepo-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin adds the option --tmprepo which takes a url to a .repo file
  downloads it and enables it for a single run. This plugin tries to ensure
  that temporary repositories are safe to use, by default, by not allowing
  gpg checking to be disabled.


pkgId: 44138b942c4493592f8edc56c8baee709908942965bcc0583229e72b0b848b63
name: yum-plugin-upgrade-helper
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to help upgrades to the next distribution version
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-upgrade-helper-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  this plugin allows yum to erase specific packages on install/update based on an additional
  metadata file in repositories. It is used to simplify distribution upgrade hangups.


pkgId: 1d1522b01f7bb02c1e929fd3b17c3eddb1528ba523c31a1815e632c0c446df2e
name: yum-plugin-verify
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to add verify command, and options
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-verify-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin adds the commands verify, verify-all and verify-rpm. There are
  also a couple of options. This command works like rpm -V, to verify your
  installation.


pkgId: 51cb2669430c2f8ee81ed587c66df520a9aaa05bbee0bea909f306c42da55aa8
name: yum-plugin-versionlock
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Yum plugin to lock specified packages from being updated
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-plugin-versionlock-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  This plugin takes a set of name/versions for packages and excludes all other
  versions of those packages (including optionally following obsoletes). This
  allows you to protect packages from being updated by newer versions,
  for example.


pkgId: 35bd8c380b45d08fde24992cd99094e79132252d0ee13a465afda37cdea8b116
name: yum-updateonboot
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Run yum update on system boot
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-updateonboot-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  Runs yum update on system boot. This allows machines that have been turned
  off for an extended amount of time to become secure immediately, instead of
  waiting until the next early morning cron job.


pkgId: 3ad2b49d79d39da42368b54d7cf562d1f7762ab7bd880d89578f667aa8d410eb
name: yum-utils
arch: noarch
version: 1.1.31
epoch: 0
release: 52.el7
summary: Utilities based around the yum package manager
url: http://yum.baseurl.org/download/yum-utils/
rpm_license: GPLv2+
rpm_vendor: CentOS
rpm_group: Development/Tools
rpm_buildhost: x86-01.bsys.centos.org
rpm_sourcerpm: yum-utils-1.1.31-52.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/yum-utils-1.1.31-52.el7.noarch.rpm
checksum_type: sha256
description:
  yum-utils is a collection of utilities and examples for the yum package
  manager. It includes utilities by different authors that make yum easier and
  more powerful to use. These tools include: debuginfo-install,
  find-repos-of-install, needs-restarting, package-cleanup, repoclosure,
  repodiff, repo-graph, repomanage, repoquery, repo-rss, reposync,
  repotrack, show-installed, show-changed-rco, verifytree, yumdownloader,
  yum-builddep, yum-complete-transaction, yum-config-manager, yum-debug-dump,
  yum-debug-restore and yum-groups-manager.


pkgId: 387a2a23082917b7073a563b0755836244db871d32044fdc5a28751ccf5d46f2
name: zsh
arch: ppc64le
version: 5.0.2
epoch: 0
release: 33.el7
summary: Powerful interactive shell
url: http://zsh.sourceforge.net/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Shells
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: zsh-5.0.2-33.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zsh-5.0.2-33.el7.ppc64le.rpm
checksum_type: sha256
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.


pkgId: 813f06663ca0d008734b6108c186def425747c34d13f7013cb1213d82676bc85
name: zsh-html
arch: ppc64le
version: 5.0.2
epoch: 0
release: 33.el7
summary: Zsh shell manual in html format
url: http://zsh.sourceforge.net/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: System Environment/Shells
rpm_buildhost: ppc64le-01.bsys.centos.org
rpm_sourcerpm: zsh-5.0.2-33.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zsh-html-5.0.2-33.el7.ppc64le.rpm
checksum_type: sha256
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.

  This package contains the Zsh manual in html format.


pkgId: 31fa45ab7911f188104ff82af3d4caf9eae18fb4e993c05d02a3444616931ec5
name: zziplib
arch: ppc64le
version: 0.13.62
epoch: 0
release: 11.el7
summary: Lightweight library to easily extract data from zip files
url: http://zziplib.sourceforge.net/
rpm_license: LGPLv2+ or MPLv1.1
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: zziplib-0.13.62-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zziplib-0.13.62-11.el7.ppc64le.rpm
checksum_type: sha256
description:
  The zziplib library is intentionally lightweight, it offers the ability to
  easily extract data from files archived in a single zip file. Applications
  can bundle files into a single zip archive and access them. The implementation
  is based only on the (free) subset of compression with the zlib algorithm
  which is actually used by the zip/unzip tools.


pkgId: 6b46266c3987c2616898d0b8ff32680bd1755280259c00af84f7e926a3cdf26b
name: zziplib-devel
arch: ppc64le
version: 0.13.62
epoch: 0
release: 11.el7
summary: Development files for the zziplib library
url: http://zziplib.sourceforge.net/
rpm_license: LGPLv2+ or MPLv1.1
rpm_vendor: CentOS
rpm_group: Development/Libraries
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: zziplib-0.13.62-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zziplib-devel-0.13.62-11.el7.ppc64le.rpm
checksum_type: sha256
description:
  The zziplib library is intentionally lightweight, it offers the ability to
  easily extract data from files archived in a single zip file. Applications
  can bundle files into a single zip archive and access them. The implementation
  is based only on the (free) subset of compression with the zlib algorithm
  which is actually used by the zip/unzip tools.

  This package contains files required to build applications that will use the
  zziplib library.


pkgId: f7eb1403cbcb0cc8a9a26c1a0cd8a3363c79c9a2c6f98b65eee5a636defcdfbf
name: zziplib-utils
arch: ppc64le
version: 0.13.62
epoch: 0
release: 11.el7
summary: Utilities for the zziplib library
url: http://zziplib.sourceforge.net/
rpm_license: LGPLv2+ or MPLv1.1
rpm_vendor: CentOS
rpm_group: Applications/Archiving
rpm_buildhost: ppc64le-02.bsys.centos.org
rpm_sourcerpm: zziplib-0.13.62-11.el7.src.rpm
rpm_packager: CentOS BuildSystem <http://bugs.centos.org>
location_href: Packages/zziplib-utils-0.13.62-11.el7.ppc64le.rpm
checksum_type: sha256
description:
  The zziplib library is intentionally lightweight, it offers the ability to
  easily extract data from files archived in a single zip file. Applications
  can bundle files into a single zip archive and access them. The implementation
  is based only on the (free) subset of compression with the zlib algorithm
  which is actually used by the zip/unzip tools.

  This packages contains all the utilities that come with the zziplib library.


